Second Extended Flag; Third Extended Flag; Fourth Extended Flag - ELCOM Euro-200TE User Manual

Programming manual

Second extended flag

If the second digit is 0, the value 2 of first digit is ignored.
Figure 3.12 Second extended flag values
Digit Default setting
1 0
2 0
3 1
Note: To change third digit is possible only after „Z" PLU report.

Third extended flag

If the third digit is 0, the value of first two digits are ignored.
Figure 3.13 Third extended flag values
Digit Default setting
1 0
2 0
3 0

Fourth extended flag

The cash register allows printing of bar codes with the final price at the end of the sale or bar codes with the
sale of every PLU. If there are printed bar-codes for every PLU on the receipt, it is possible to set the PLU
price or amount to be printed in the bar code or preprogrammed bar-code will be printed.
The cash register has possibility to enable all cashiers or only selected cashier to use refund operation.
Figure 3.14 Fourth extended flag values
Digit Default setting Meaning
1 0
2 0
3 1
4 1
5 2
6 5
36
Meaning
Handing out of stock according to delivery note
Mandatory entry of customer number at hand out stock 0 - no, 1 - yes
Update PLU sale data upon handing out from stock
(handed amount and total hand out value)
Meaning
Store tax information in PC data
Allow clearing of PC data in cash register
Store data for PC
Allowance to refund
Bar-code printing
Number of empty rows after the bar-co-
de print out
Print numerals in bar-code
Number of decimal places for encoding
price into the bar-code
Maximum number of places for enco-
ding price into the bar-code
Valid values
0 - handing out is disabled,
1 - handing out is possible without
customer's checking,
2 - handing out is only possible with
customer's checking
0 - no, 1 - yes
Valid values
0 - no, 1 - yes
Valid values
0 – all cashiers are allowed to refund,
1-6 – specifies which cashier is allowed to refund
0 – without bar-code,
1 – print barcode with final price at the end of receipt,
2 – print code for every PLU with encoded amount,
3 – print code for every PLU with encoded price,
4 – print programmed bar-code for every PLU
0-9
0 – bar-code will not contain numerals,
1 – bar-code will contain numerals
0-3
1-5