Departments Programming - ELCOM Euro-200TE User Manual

DEPARTMENTS PROGRAMMING

The Euro-200TE cash register has 30 departments (DPT) available. Each department has three basic com-
ponents:
1) Price
2) Department flag
3) Name
Programming procedure:
1) Switch the cash register to the "P" mode by pressing

2) Press the
second line on the display to indicate department price programming. The programmed price ap-
pears in the first display row.
3) Enter the new department price (maximum eight digits, including decimals). If you mistype, you can
correct your mistakes by pressing

4) Press the
display shows current department number in the second display row together with label ("
to indicate department flag programming. The value of department's flag is shown in the first dis-
play row. Press
5) Enter the department flag for the current department according to the Figure 3.22. If you mistype,
you can correct it using the
Figure 3.22 Department flag values
Digit Default setting
1 1
2 0
3 0
4 3
5 8
(DPT) key. The current department number and the label ("
VGR
1

(S ) key to continue with programming the flag for the current department. The
UBTOTAL

(T ) key to stop department programming (next steps will not run).
OTAL
VGR FLAG
1

(C
LEAR
Meaning
Assigning VAT level to a department
Type of department
Negative department
Sale feature
HALO limit, maximum 8 (maximum number of
digits allowed)

0.00
PRIS
(C ) key.
LEAR
10038
) key.
Valid values
1 – tax level 1,
2 – tax level 2,
3 – tax level 3,
4 – tax level 4,
0 – normal,
1 – single item department
0 – no,
1 – yes
0 – sale forbidden,
1 – open price (manually entered price),
2 – fixed price (preprogrammed price),
3 – 1+2 (preprogrammed price or the possibi-
lity to enter a price manually)
1-8
Programming manual
.
price
") appear in the
flag ")
43