ELCOM Euro-200TE User Manual page 47

8) After setting the first PLU flag, continue with programming of the second PLU flag. In the first row the
actual second PLU flag will appear and the second row will display the PLU order number with the
description "PLU FLAG2". Enter the value of the flag per figure number. 3.23.. A PLU ranging from

1001-1015 cannot be linked to another PLU. After setting the PLU second flag, set the value by pressing

the key; cancel and leave the programming of this section using the
value using the
Figure 3.25 Values for second PLU flag
Digit Default setting
1 - 2 00
3 1
4 0
5 1
6 1
7 8
9) After setting the second PLU flag, the name of the PLU has to be set. The actual PLU name will appear
on the first row of the display and the order number with the description "PLU NAME" will appear in the
second row the. Enter the name of the PLU in 20 digits or in 10 digits for double-size characters. Set
the value by pressing the
delete an incorrect value using the
10) Programming continues with the setting of the bar code identification of a PLU. The actual bar code
value that identifies the PLU will be on the display, and the PLU order number with the description "PLU

B-CODE" will appear in the second row. Enter the bar code as it is on the label and set the value by
pressing the
lete an incorrect value with the key
11) If the entered bar code is already set to another PLU, the electronic cash register will prompt you to
change this value by displaying the PLU information set to the bar code. On display will appear "EAN-
-KOD FINNS" and the number ofhe PLU already set to the entered bar
code and save the value by pressing the key; correct the value by pressing the
gramming by pressing the
key.
Meaning
Assigning the sale of another PLU to the sale of an
actual PLU (linked PLU)
Sales unit assigning
PLU stock information on PLU report
PLU sale possibility even if stock is negative
Split pricing possibility
HALO limit, maximum 8 (maximum number of digits
allowed)


key; cancel and leave off programming of this section with the

key; cancel and leave off programming of this section by pressing the
000000000000000000

0010118
1 PLU FLAG2
key.
1 PLU NAMN
.
1 PLU EAN-K
3 PLU B-CODE
Programming manual

key or delete an incorrect
Valid values
00 – no linked PLU,
01 – PLU No. 1001 is linked,
02 to 15 – PLUs 1002-1015 are linked
1 – The first sales unit assigning,
2 to 8 – assigning the sales unit 2 – 8
0 – no, 1 – yes
1–8


code. Enter the correct bar
3. PLU

key or

key or de-
key or finish pro-
47