Table of Contents
Advertisement
Operation in registration mode
Registration using bar-codes
A bar-code scanner can be connected to the cash register. Information is then registered simply by scan-
ning the bar-code on the article's packaging. If the bar-code scanner is to operate correctly, it has to be pro-
perly configured and the cash register has to have its relevant flags set to proper values, more specifically
the fifth system flag (see PLU bar-codes programming section in the previous chapter).
Example: Customer buys three pieces of butter that have a bar codes on its packaging.
Step
1.
2.
•
registration by a bar-code entered via the keyboard
In the case of bar-code scanner failure or if a bar-code is damaged, it is possible to enter the bar-code via
the keyboard.
Example 1: Registration of butter with the bar-code 8 586001 760096.
Step
1.
2.
3.
Example 2: Registration of five butters with the bar-code 8 586001 760096.
Step
1.
2.
3.
4.
Weight entry by electronic scales
The Euro-200TE is able to read the weight of an article directly from connected electronic scales. Communi-
cation between the cash register and the scales is possible only in "R" and "T" mode. The electronic scales
are connected to SCAN./SCALE connector of the cash register.
Press the
(SCALES) button to communicate with the scales. You can change the weight of the article
(add or take the goods from the scales) until any key is pressed on the cash register keyboard. After the
weight is read by the cash register, enter the PLU number and press the
the scales is unstable, it is not possible to continue the sale.
In the case that electronic scale and scanner are connected together to one port and we want to register
weight of a PLU article using scanner it is need to be pressed
is scanned.
70
Press
using a bar-code scanner
Press
Press
Butter
3*34.90
Butter
1*12.40
...
Butter
5*12.40
...
(MULTIPLY) key before bar code of PLU
A
=104.70
A
=12.40
A
=62.00
(PLU) button. If the weight on
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-200TE and is the answer not in the manual?