Correction Of Function Texts; Function Texts Print Out - ELCOM Euro-200TE User Manual

Programming manual
Figure 3.21 Default function texts
Text no. Default setting
1 KONTANT
2 CHECK
3 KORT
4 TILLBAKA
5 RETUR
6 FELSLAG
7 INBETALT
8 UTBETALT
9 TOTALT
10 DOKUMENTNUMMER
Function texts programming procedure:

1) Switch the cash register to the "P" mode by pressing
2) Press the
function text in the second display row and contents of that text in the first display row.

3) Enter new function text that could have up to 17 characters. If you mistyped, you can correct mistakes

by pressing
4) Press (S
function texts programming by pressing

Correction of function texts

1) Switch the cash register to the "P" mode by pressing
2) Enter the number of text to be corrected and press
3) Continue in the same way as when programming function texts (consult section above).
4) Print out all programmed function texts by pressing
tion text by pressing
5) Correction of function texts is finished by pressing

Function texts print out

To check the programmed function texts, press
programming mode, press
function text by pressing
42
(V ) key. The cash register will display the number of the currently programmed
OID
KONTANT
1Funk. text
(C ) key. Details on entering texts are located at the end of this chapter.
LEAR
) key to programme next available function text; continue with step 3). Finish the
UBTOTAL

(EAN) key.

(V ) key first and then the

OID
(EAN) key.
Description
Cash payment denomination
Check payment denomination
Credit card payment denomination
Change value denomination
Refund value denomination
Void denomination
Received on account denomination
Paid out denomination
Total value
Document number


(T ) button at any time.
OTAL

� 
(Void) key.

(C
HECK

(T
OTAL

(C ) key in function texts programming mode. If in
HECK 
(C
HECK
.
.
) key; print the currently edited func-
) button.
) key. Print the value of a particular