Initialization - ELCOM Euro-150TE Flexy User Manual

INITIALIZATION

If you are launching the cash register into operation for the first time, it is useful to initialize it. Initialization of
the cash register clears all programmed data and their meters for product items, departments, sales units,
surcharges and discounts. All other settings and register counters are preserved. You can select to initiate
programmable keys only.
Procedure for initialization
Sequence of steps
Turn the cash register on and using the buttons
 �
and or enter into the initialization menu (Main menu – P-mode
– System params – Initialization)
Select what you want to initiate with keys
or All settings.

Press TOTAL nd then confirm the initialization by pressing the
SUBTOTAL key.
The cash register begins initialization and „Clearing..." appears on the
display. After successful completion of initialization the display reads:
Procedure of programming size of memory for PLU and Journal
Sequence of steps
Turn on the cash register and using the buttons
 �
and or enter into the menu (Main menu – P-mode – System
params – PLU/Journal). Please save all PLU and journal before changing
the size of memory for PLU and Journal.
Set the number of PLU. Interval is 10 - 2790 and press
Information about capacity for journal. Press buttons

Press the SUBTOTAL key to confirmation and press any button for
canceling.
The cash register begins initialization and „Clearing..." appears on the
display. After successful completion of initialization the display reads:
GENERAL PROCEDURE WHEN PROGRAMMING IN "P"-MODE
Before you start programming the cash register, we recommend that you read this chapter at least one time
through!
note:
If a button has two functions, the function in the lower part of the button is selected by directly pushing the button;
in order to select the upper function, it is necessary to first press the
 
(MENU),
 �
or Programmable keys
 
(MENU),

TOTAL

(MENU),
PROGRAMMING THE CASH REGISTER
Display
System params
TOTAL
Initialization
Initialization
Prog. Keys
Initialization
Continue?

yes=ST, no=any
Store init. OK
Display
Change of value
TOTAL
deletes PLU&JRN!
PLU Count
Journal Capacity
906kB/580
Save change?
yes=ST, no=any
System params
PLU/Journal

(SHIFT) button.
All
2000
23