Table of Contents
Advertisement
Figure 3.23 Default sale units
Digit
1
2
3
4
4) Press
(S
programming at any time by pressing the
Programmed sale units correcting
1) Switch the cash register to the "P" mode by pressing
2) Enter the number of the sales unit you want to modify and press
3) Continue the programming as described in the previous section (see above).
4) You can print out all programmed sale units by pressing
grammed sale unit, press
5) Finish the corrections by pressing
Sale unit settings print out
If you want to check the settings of the sale units, press the
mode. If the cash register is in the programming mode, first press the
(C
) key. For a printout of the current sale unit, press the
HECK
PLU WITH A SECOND PRICE AND TAX VALUE PROGRAMMING
The Euro-200TE can handle up to 16,000 PLU's, depending on the PLU number defined.
Procedure for programming a PLU with two prices and tax levels:
1) 1st PLU price
2) assigning the 1st price to a tax level
3) 2nd PLU price
4) assigning the 2nd price to a tax level
5) flag number 1
6) flag number 2
7) PLU name
8) MIX&MATCH
9) PLU bar code (identification)
Procedure when programming a PLU with two prices:
1) Enter P mode by pressing
2) If a particular PLU is to be programmed, enter its number from the PLU database. If no number is ente-
red, programming will start from the first PLU. Press
"PLU PRIS 1" will appear on the display.
Units
st
kg
l
) key to continue sale units programming with the next sale unit. Finish sales unit
UBTOTAL
(EAN) key.
(T
) key.
OTAL
(T
) key.
OTAL
and the PLU order number and the description
1 PLU PRIS 1
Programming manual
Digit
5
6
7
8
.
(S
URCHARGE
(C
) key; to print the currently pro-
HECK
(C
) key in the sale units programming
HECK
(Surcharge) key, then the
(EAN) key.
0.00
Units
m
m
2
fl
pkt
) key.
45
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-200TE and is the answer not in the manual?
Questions and answers