Table of Contents
Advertisement
INITIALIZATION
Before putting the cash register into use for the first time, it is necessary to initialize it. Initialization of the
cash register clears all programmed product items, departments, sales units, surcharges and discounts. All
other settings and register counters are preserved.
Procedure for initialization:
Sequence of steps
Turn the cash register on and using the buttons
TOTAL and
(Main menu – P-mode – System parameter – Initialization)
Press
TOTAL and then confirm the initialization by pressing the
SUBTOTAL button.
The cash register begins initialization and „Clearing..." appears on the
display. After successful completion of initialization the display reads:
GENERAL PROCEDURE WHEN PROGRAMMING IN "P" MODE
Before you start programming the cash register, we recommend that you read this chapter at least one time
through!
Note:
If a button has two functions, the function in the lower part of the button is selected by directly pushing the
button; in order to select the upper function, it is necessary to first press the
Basic rules for navigating in a menu
1) Switch the cash register into the Main Menu by pressing the
�
keys
or
to navigate to the P-mode menu
confirm your choice by pressing the
2) By pressing the arrow keys
mode, which are described in more detail in the following chapter.
3) Press the
TOTAL key to enter into the selected item menu, or to confirm (save) a programmed va-
lue. Continue in this way until you have programmed all of the necessary parameters. Or press the
(MENU) key to switch to a menu one level higher (back).
or
�
enter into the initialization menu
MAIN MENU
TOTAL. The display shows:
�
or
you can navigate through the individual lines of the programming
(MENU),
P-mode
P-mode
PLU
Programming the cash register
Display
System params
Initialization
Continue?
yes=ST, no=other
Clearing OK
(SHIFT) button.
(MENU) key and then use the arrow
23
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-50iTE Mini and is the answer not in the manual?
Questions and answers