D-Link xStack DGS-3120 Series Cli Reference Manual page 326

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a DHCP pool:
DGS-3120-24TC:admin#create dhcp pool dhcppool01
Command: create dhcp pool dhcppool01
Success.
DGS-3120-24TC:admin#
26-5 delete dhcp pool
Description
This command is used to delete a DHCP pool.
Format
delete dhcp pool [<pool_name 12> | all]
Parameters
<pool_name 12> - Specify the name of the DHCP pool.
all - Specify to delete all the DHCP pools.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a DHCP pool:
DGS-3120-24TC:admin#delete dhcp pool dhcppool01
Command: delete dhcp pool dhcppool01
Success.
DGS-3120-24TC:admin#
26-6 config dhcp pool network_addr
Description
This command is used to specify the network for the DHCP pool. The addresses in the network
are free to be assigned to the DHCP client. The prefix length specifies the number of bits that
comprise the address prefix. The prefix is an alternative way of specifying the network mask of the
client. The prefix length must be preceded by a forward slash (/). When the DHCP server receives
321