D-Link xStack DGS-3120 Series Cli Reference Manual page 403

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
36-3 create multicast_fdb
Description
This command is used to create a static entry in the multicast MAC address forwarding table
(database).
Format
create multicast_fdb <vlan_name 32> <macaddr>
Parameters
<vlan_name 32> - The name of the VLAN on which the MAC address resides. The maximum
name length is 32.
<macaddr> - Enter the multicast MAC address to be added to the static forwarding table here.
Addresses in the range 01-80-C2-XX-XX-XX are reserved addresses, 01-00-5E-XX-XX-XX
are reserved for IPv4 multicast MAC address and 33-33-XX-XX-XX are reserved for IPv6
multicast MAC address.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a multicast MAC forwarding entry to the default VLAN:
DGS-3120-24TC:admin#create multicast_fdb default 01-00-5C-11-22-33
Command: create multicast_fdb default 01-00-5C-11-22-33
Success.
DGS-3120-24TC:admin#
36-4 config multicast_fdb
Description
This command is used to configure the Switch's multicast MAC address forwarding database.
Format
config multicast_fdb <vlan_name 32> <macaddr> [add | delete] <portlist>
Parameters
<vlan_name 32> - The name of the VLAN on which the MAC address resides. The maximum
name length is 32.
<macaddr> - Enter the multicast MAC address to be added or removed to and from the static
forwarding table here. Addresses in the range 01-80-C2-XX-XX-XX cannot be configured as
static MAC addresses. Addresses in the range 01-00-5E-XX-XX-XX and 33-33-XX-XX-XX-XX
398