D-Link xStack DGS-3120 Series Cli Reference Manual page 521

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Format
show ipv6route {[<ipv6networkaddr> | <ipv6addr>]} {[static | ripng | ospfv3 | hardware]}
Parameters
None.
Restrictions
<ipv6networkaddr> - (Optional) The destination network of the route.
<ipv6addr> - (Optional) Specify the destination 128-bit length IPv6 address to be displayed.
(RI and EI Mode Only)
static - (Optional) Specify to display only the static route entries.
ripng - (Optional) Specify to display only the RIPng route entries.
ospfv3 - (Optional) Specify to display only the OSPFv3 route entries.
hardware - (Optional) Specify to display only the route entries which have been wrote into
hardware table.
Example
Show all the IPv6 routes:
DGS-3120-24PC:admin#show ipv6route
Command: show ipv6route
IPv6 Prefix: 1111:1111::/64
Next Hop : ::
IPv6 Prefix: 2103::/64
Next Hop : ::
IPv6 Prefix: 5000:5000::/64
Next Hop : ::
IPv6 Prefix: 6000:6000::/64
Next Hop : ::
IPv6 Prefix: 7000:7000::/48
Next Hop : ::
Total Entries: 5
DGS-3120-24TC:admin#
Protocol: Local
IPIF : System
Protocol: Local
IPIF : i6
Protocol: Local
IPIF : i5
Protocol: Local
IPIF : i6
Protocol: Local
IPIF : i7
516
(RI and EI Mode Only)
(RI Mode Only)
(RI Mode Only)
Metric: 1
Metric: 1
Metric: 1
Metric: 1
Metric: 1