D-Link xStack DGS-3120 Series Cli Reference Manual page 284

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
To enable the VRRP interface state change debug flag:
DGS-3120-24TC:admin#debug vrrp interface_change state enable
Command: debug vrrp interface_change state enable
Success.
DGS-3120-24TC:admin#
To enable the VRRP timers debug flag:
DGS-3120-24TC:admin#debug vrrp timers state enable
Command: debug vrrp timers state enable
Success.
DGS-3120-24TC:admin#
22-43 debug vrrp clear counter (RI Mode Only)
Description
This command is used to reset the VRRP debug statistic counters.
Format
debug vrrp clear counter
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To clear VRRP statistic counters:
DGS-3120-24TC:admin#debug vrrp clear counter
Command: debug vrrp clear counter
Success.
DGS-3120-24TC:admin#
22-44 debug vrrp log state (RI Mode Only)
Description
This command is used to enable or disable the VRRP debug log state.
279