D-Link xStack DGS-3120 Series Cli Reference Manual page 320

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To configure the inner VID as 10 to the DHCP server with the IP of 10.0.0.1:
DGS-3120-24TC:admin#config dhcp_relay server_cvid 10.0.0.1 10
Command: config dhcp_relay server_cvid 10.0.0.1 10
Success.
DGS-3120-24TC:admin#
25-25 show dhcp_relay server_cvid
Description
This command is used to display DHCP relay agent destination IP address inner VLAN ID. .
Format
show dhcp_relay server_cvid {<ipaddr>}
Parameters
<ipaddr> - Enter the DHCP or BOOTP server IP address.
Restrictions
None.
Example
To display the DHCP server with the IP of 10.0.0.1:
DGS-3120-24TC:admin#show dhcp_relay server_cvid 10.0.0.1
Command: show dhcp_relay server_cvid 10.0.0.1
Server CVID
------------ ---------------
10.0.0.1 10
Total Entries : 1
DGS-3120-24TC:admin#
25-26 config dhcp_relay port_option_82
Description
This command is used to configure the DHCP relay agent option 82 information of each port.
Format
config dhcp_relay port_option_82 {<portlist>} [circuit_id | remote_id] vendor3 <string 32>
315