D-Link xStack DGS-3120 Series Cli Reference Manual page 496

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
44-2 show ipmc cache
Description
This command is used to display the IP multicast forwarding cache.
Format
show ipmc cache {group <group>} {ipaddress <network_address>}
Parameters
group - (Optional) Specify the multicast group.
<group> - Enter the multicast group value here.
ipaddress - (Optional) Specify the network address used here.
<network_address> - Enter the network address used here.
Restrictions
None.
Example
To display the IP multicast forwarding cache:
DGS-3120-24TC:admin#show ipmc cache
Command: show ipmc cache
IP Multicast Forwarding Table
Multicast Source
Group Address/Netmask
--------------- ----------------------
224.1.1.1 10.48.74.121/8
224.1.1.1 20.48.74.25/8
224.1.2.3 10.48.75.3/8
Total Entries: 3
DGS-3120-24TC:admin#
Upstream
Neighbor
---------------
10.48.75.63
20.48.75.25
10.48.76.6
491
Expire Routing
Time Protocol
------ ---------
30 DVMRP
20 PIM-DM
30 DVMRP