D-Link xStack DGS-3120 Series Cli Reference Manual page 138

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show egress_access_profile profile_id 1
Command: show egress_access_profile profile_id 1
Egress Access Profile Table
===============================================================================
=
Profile ID: 1
MASK on
VLAN
802.1p
Available HW Entries : 127
-------------------------------------------------------------------------------
-
Rule ID : 1 (auto assign)
Match on
802.1p
Action:
Permit
===============================================================================
=
DGS-3120-24TC:admin#
7-5 show current_config egress_access_profile
Description
This command is used to display the egress ACL part of current configuration in user level of
privilege.
The overall current configuration can be displayed by "show config" command which is accessible
in administrator level of privilege.
Format
show current_config egress_access_profile
Parameters
None.
Restrictions
None.
Profile name: EthernetACL
: 0xFFF
Ports: 1:1
: 0
133
Type: Ethernet