D-Link xStack DGS-3120 Series Cli Reference Manual page 376

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show dvmrp nexthop
Command: show dvmrp nexthop
DVMRP Routing Next Hop Table
Source Address/NetMask
----------------------
10.0.0.0/8
10.0.0.0/8
20.0.0.0/8
20.0.0.0/8
30.0.0.0/8
30.0.0.0/8
Total Entries : 6
DGS-3120-24TC:admin#
30-7 show dvmrp routing_table
Description
This command is used to display the DVMRP routing table.
Format
show dvmrp routing_table {ipaddress <network_address>}
Parameters
ipaddress - (Optional) Specify the IP address and netmask of the destination used.
<network_address> - Enter the IP address and netmask of the destination used here.
If no parameter is specified, the system will display the whole DVMRP routing table.
Restrictions
None.
Example
To display DVMRP routing table:
Interface Name Type
--------------- ------
ip2 Leaf
ip3 Leaf
System Leaf
ip3 Leaf
System Leaf
ip2 Leaf
371