D-Link xStack DGS-3120 Series Cli Reference Manual page 475

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Example
To show the IMPB global configuration:
DGS-3120-24TC:admin#show address_binding
Command: show address_binding
Roaming state
Trap/Log
DHCP Snoop(IPv4)
DHCP Snoop(IPv6)
ND Snoop
Autosave state
Save Filename
Function Version
DGS-3120-24TC:admin#
To display the IMPB settings for ports 1 to 10:
DGS-3120-24TC:admin#show address_binding ports 1-10
Command: show address_binding ports 1-10
ARP:ARP Inspection
Port ARP IP
----- -------- -------- -------- ---- --------- ----------- --------------
1 Disabled Disabled Disabled All
2 Disabled Disabled Disabled All
3 Disabled Disabled Disabled All
4 Disabled Disabled Disabled All
5 Disabled Disabled Disabled All
6 Disabled Disabled Disabled All
7 Disabled Disabled Disabled All
8 Disabled Disabled Disabled All
9 Disabled Disabled Disabled All
10 Disabled Disabled Disabled All
DGS-3120-24TC:admin#
43-9 show address_binding blocked
Description
This command is used to display the blocked MAC entries.
Format
show address_binding blocked [all | vlan_name <vlan_name> mac_address <macaddr>]
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: dhcpsnp.cfg
: 3.97
IP:IP Inspection
ND Prot Zero IP
470
ND:ND Inspection
DHCP Packet Stop Learning
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Not Allow Forward
Prot:Protocol
Threshold/Mode
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal
500/Normal