D-Link xStack DGS-3120 Series Cli Reference Manual page 117

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
<value 1-6> - Enter the profile ID used here. This value must be between 1 and 6. A lower
value denotes a higher priority.
profile_name - (Optional) Specify the name of the profile.
<name 1-32> - Enter the profile name used here. This name can be up to 32 characters long.
Restrictions
None.
Example
To display the current access list table:
DGS-3120-24TC:admin#show access_profile
Command: show access_profile
Access Profile Table
Total User Set Rule Entries : 4
Total Used HW Entries
Total Available HW Entries
==============================================================================
Profile ID: 1
MASK on
VLAN
802.1p
Ethernet Type
Available HW Entries : 255
------------------------------------------------------------------------------
Rule ID : 1
Match on
VLAN ID
802.1p
Ethernet Type
Action:
Permit
==============================================================================
==============================================================================
Profile ID: 2
MASK on
VLAN
DSCP
ICMP
Available HW Entries : 255
: 5
: 1531
Profile name: EtherACL
: 0xFFF
Ports: 1:1
: 1
: 0
: 0xFFFE
Profile name: IPv4ACL
: 0xFFF
112
Type: Ethernet
Type: IPv4