D-Link xStack DGS-3120 Series Cli Reference Manual page 440

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the IGMP proxy:
DGS-3120-24TC:admin#disable igmp_proxy
Command: disable igmp_proxy
Success.
DGS-3120-24TC:admin#
41-3 config igmp_proxy downstream_if
Description
This command is used to configure the IGMP proxy downstream interfaces. The IGMP proxy plays
the server role on the downstream interfaces. The downstream interface must be an IGMP-
snooping enabled VLAN.
Format
config igmp_proxy downstream_if [add | delete] vlan [<vlan_name 32> | vlanid <vidlist>]
Parameters
add - Specify to add a downstream interface.
delete - Specify to delete a downstream interface .
vlan – Specify the VLAN by name or ID.
<vlan_name 32> - Specify a name of VLAN which will be added to or deleted from the IGMP
proxy downstream interface. The maximum length is 32 characters.
vlanid - Specify a list of VLAN IDs to be added to or deleted from the IGMP proxy
downstream interface.
<vidlist> - Specify a list of VLAN IDs which will be added to or deleted from the IGMP
proxy downstream interface.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the IGMP proxy's downstream interface:
435