D-Link xStack DGS-3120 Series Cli Reference Manual page 671

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin#show max_mcast_group ports 1:1-1:2
Command: show max_mcast_group ports 1:1-1:2
Port Max Multicast Group Number
------ ----------------------------
1:1 100
1:2 Infinite
Total Entries: 2
DGS-3120-24TC:admin#
To display the maximum number of multicast groups that VLANs 1 and 2 can join:
DGS-3120-24TC:admin#show max_mcast_group vlanid 1-2
Command: show max_mcast_group vlanid 1-2
VLAN Max Multicast Group Number
------ ----------------------------
1 Infinite
Total Entries: 1
DGS-3120-24TC:admin#
65-9 show limited_multicast_addr
Description
This command is used to display the multicast address range by port or by VLAN.
When the function is configured on a port, it limits the multicast groups operated by the IGMP or
MLD snooping function and layer 3 functions. When the function is configured on a VLAN, it limits
the multicast groups operated by the IGMP or MLD layer 3 functions.
If the IPv4 or IPv6 option is not specified, IPv4 is implied.
Format
show limited_multicast_addr [ports {<portlist>} | vlanid {<vlanid_list>}] {[ipv4 | ipv6]}
Parameters
ports - Specify the range of ports that require information displaying about the multicast address
filtering function.
<portlist> - (Optional) Enter the list of port to be configured here.
vlanid - Specify the VLAN ID of VLANs that require information displaying about the multicast
address filtering function.
<vlanid_list> - (Optional) Enter the VLAN ID list here.
ipv4 - (Optional) Specify to display the IPv4 multicast profile associated with the port.
ipv6 - (Optional) Specify to display the IPv6 multicast profile associated with the port.
Action
---------
Drop
Drop
Action
---------
Drop
666