D-Link xStack DGS-3120 Series Cli Reference Manual page 458

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
vlanid - (Optional) Specify the ID of the VLAN for which you want to view the IGMP snooping
configuration.
<vlanid_list> - Enter the VLAN ID list here.
If the VLAN is not specified, the system will display all current IGMP snooping configurations.
Restrictions
None.
Example
To show IGMP snooping:
Command: show igmp_snooping
IGMP Snooping Global State
VLAN Name
Query Interval
Max Response Time
Robustness Value
Last Member Query Interval
Querier State
Querier Role
Querier IP
Querier Expiry Time
State
Fast Leave
Rate Limit(pkt/sec)
Proxy Reporting
Proxy Reporting Source IP
Version
Total Entries: 1
DGS-3120-24TC:admin#
42-17 show igmp_snooping rate_limit
Description
This command is used to display the IGMP snooping rate limit setting.
Format
show igmp_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
Parameters
ports - Specify the port range.
<portlist> - Enter the range of ports here.
vlanid - Specify the VLAN range..
: Disabled
: default
: 125
: 10
: 2
: 1
: Disabled
: Non-Querier
: 0.0.0.0
: 0 secs
: Disabled
: Disabled
: No Limitation
: Disabled
: 0.0.0.0
: 3
453