Network Tab; Configuring Ddns Settings - Lorex QLR464 Instruction Manual

Vista Pro 6 Server: Viewing Mode

Network Tab

The network tab allows you to configure E-mail notification and network settings.
To configure the Network settings:
1. Click the (
Setup
2. Under Network Config, select the
Enter the following information into the blank fields:
(6808 default);
Web Port
3. If required, click the
settings.
4. Click to save your settings.
OK

CONFIGURING DDNS SETTINGS

If you have registered for a Lorex DDNS account, you can enter in your Lorex DDNS account
information to remotely connect to your system using the Internet Explorer web browser.
Prerequisites:
You must set up a DDNS account.For details on how to set up a DDNS account, see "Appendix A:
Viewing Your System Remotely Using DDNS" on page 64.
To configure DDNS settings:
1. Click the (
Setup
2. Under DDNS Setting, click the
opens.
Figure 8.5 DDNS setting window.
3. Under Domain Name, enter the SUBDOMAIN of your Lorex DDNS address (ie. if your domain
name is tomsmith.lorexddns.net, only enter tomsmith into the ID field)
4. Under User ID, enter in your
5. Under User Password, enter the password of the Lorex DDNS account.
6. Click . A message should confirm a proper registration. Click
Register
7. Using Internet Explorer, type in your Lorex DDNS address to access your system remotely.
34
)button and then click the
Network Use
(6880 default)
button. This is a shortcut to the control panel's network
Network Config
)button and then click the
checkbox. Click the
Use
of the Lorex DDNS account.
user ID
tab. The Network tab opens.
Network
checkbox.
(6807 default);
Live Port
tab. The Network tab opens.
Network
button. The DDNS Setting window
Set
Enter your DDNS address (ie.
tomsmith.lorexddns.net)
Enter your DDNS user ID
Enter your DDNS password
Playback Port
to continue.
OK