Step 3 Of 4: Enable Ddns On The Dvr; Step 4 Of 4: Connect To The Dvr's Ddns Address - Lorex LH150 ECO4 SERIES Instruction Manual

25 DDNS Setup (Advanced)
9. Click Save to register your product for DDNS. A confirmation email will be sent to the
email address used to register for My Lorex. You will need this information to ena-
ble remote access to your system. Record your information below:
Domain name/URL Request:
DDNS User Name:
Device DDNS password:

25.2.3 Step 3 of 4: Enable DDNS on the DVR

To enable DDNS in your DVR:
1. Right-click to open the Menu Bar and click the Main Menu button (
system password if prompted.
2. Click Network and select the DDNS tab.
3. Configure the following:
3.1. In the DDNS drop-down menu, select Enable.
3.2. Beside Server, select LOREXDDNS (default).
3.3. Under Domain Name, enter your Domain name/URL Request from the confirmation email
that was sent after you created your DDNS account.
3.4. Under User Name, enter your DDNS User Name that was emailed to you after DDNS
registration.
3.5. Under Password, enter your DDNS Device password that was emailed to you after DDNS
registration.
4. Click Apply to save your settings.

25.2.4 Step 4 of 4: Connect to the DVR's DDNS Address

Note
Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address before at-
tempting to connect.
To connect using the DVR's DDNS address on a PC:
1. Install the Lorex Stratus Client on a remote computer.
2. Once installation is finished, double-click the Lorex Stratus Client icon (
the desktop. The DVR login screen appears.
#LX400012; r. 2.0/12066/12066; en-US
). Enter the
1
2
3
4
5
) from
157