Step 4 Of 4: Connect To The Dvr's Ddns Address; To Connect Using The Dvr's Ddns Address On A Pc; To Connect Using The Dvr's Ddns Address On A Mac - Lorex LH158 Instruction Manual

Appendix F: DDNS Setup (Advanced)
7 Under Password, enter your DDNS Device password that was emailed to you after DDNS
registration.
8 Click Apply to save your settings.

Step 4 of 4: Connect to the DVR's DDNS Address

NOTE: Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address
before attempting to connect.

To connect using the DVR's DDNS address on a PC:

1 Install the Lorex Stratus Client 1 on a remote computer.
2 Once installation is finished, double-click the Lorex Stratus Client 1 icon (
desktop. The DVR login screen appears.
3 Under Login Type, select IP Login.
4 Under IP Address, enter the DVR's DDNS Address (e.g.
5 Under User Name, enter the DVR's user name (default: admin).
6 Under Password, enter the password you created when you connected over the local
network.
7 Under Client Port, enter the DVR's Client Port (default: 9000).
8 Click Login.

To connect using the DVR's DDNS address on a Mac:

1 Install the Lorex Stratus Client on a remote computer.
2 Open Safari, then click Safari>Quit Safari. This resets Safari to complete the installation.
128
tomsmith.lorexddns.net
Select IP Login
Enter DDNS address
Enter User Name (default: admin)
Enter Password
Enter Client Port (default: 9000)
Click Login
tomsmith.lorexddns.net
) from the
).