A Malfunction Occurs In The Touch Screen/The Display On The Touch Screen Is In An Incorrect Position - Fujitsu PA03768-B005 Operator's Manual

A Malfunction Occurs in the Touch Screen/The Display on the Touch Screen Is in
an Incorrect Position
Check the following points
Did you turn the scanner off then back on? (page 167)
●
If the problem persists, check the items in
first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
●
Did you turn the scanner off then back on?
Solution
Turn the scanner off then back on.
Wait for at least 5 seconds after turning off the scanner before turning it back on.
For details, refer to
Before You Contact the Scanner Service Provider (page 217)
How to Turn the Power ON (page
167
56).
Troubleshooting