Upload - D-Link DGS-3100 Series Cli Manual

Gigabit stackable managed switch
Hide thumbs Also See for DGS-3100 Series:
Table of Contents

Advertisement

!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!
The copy o
!
3920460 by
DGS3100#

upload

Purpose
Syntax
Description
Parameters
Restrictions
Exampl
e usage:
To up
load a configuration file:
D
GS3100# upload configuration 1.1.1.23 1\running—config
01–Jan–2000 01:2
destination URL tftp://1.1.1.23/1\running–config
... ..01–Jan–2000 01:26:16 %COPY–W–TRAP: The copy operation
success fully
!
158 bytes copied in 00:00:05 [hh:mm:ss]
DGS3100#
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!01–Jan–2000 01:22:49 %COPY–W–TRAP:
peration was completed successfully
tes copied in 00:03:01 [hh:mm:ss
To upload the current sw
upload configuration <ipaddr> <path_filename 64> {startup |
running}
The upload command uploads the Switch's current settings to a
TFTP server.
iguration − Specifies that the Switch's current settings are to be
conf
uplo
aded to the TFTP server.
<ipaddr> − The IP address of the TFTP server. The TFT
must be on the same IP subne
<path_filename 64> − The loc
the TFTP server. This file will be replaced by the uploaded file from
the Switch.
startup − Indicates the Startup Configuration file is to be uploaded.
running − In
The TFTP server must be on the same IP subnet as the Switch.
Only administrator-level users can issue this command.
6:11 %COPY–I–FILECPY: Files Copy – source URL running–config
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
]
itch settings to a TFTP server.
t as the Switch.
ation of the Switch configuration file on
dicates the Running Configuration file is to be uploaded.
47
!!!!!!!!!!!!!!!!!!!!
P server
was completed

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents