Show Cpu Utilization - D-Link DGS-3100 Series Cli Manual

DGS-3100 Gigabit Ethernet Switch Manual
Parameters
Restrictions
Example usa ge:
To pi ng the IP addre

show cpu utilization

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show CPU utilization information:
<ipaddr> - The IP address of the host.
times <value 1-255> - The number of individual ICMP echo
messages to be sent. The maximum value is 255. The default is 0.
Pinging an
target device an infinite number of times.
timeout <sec 1-99> -
response from the remo
specified. The default is 1 second.
None.
ss 10.6.15 0.34 thre e times:
DGS3100# ping 10.6.150.34 times 3
Pinging 10.6.150.34 with 56 bytes of data:
5 6 bytes from 10.6.150.34: icmp_seq=1. time=0 ms
56 bytes fr om 10.6.150.34: icmp_seq=2. time=0 ms
5 6 bytes from 10.6.150.34: icmp_seq=3. time=0 ms
----10.6.150.34 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms) m in/avg/max = 0/0/0
Succes s.
DGS3 100 #
To measure CPU utiliza
show cpu utilization
The show cpu uti
CPU utilization.
None.
None.
DGS3100# show cpu utilization
CPU utilization service is on.
CPU utili zation
-------------- --------
five seco nds:2% ;one minute:1% ;five minutes:1%
DGS3100 #
IP address without the times parameter will ping the
The time-out period while waiting for a
te device. A value of 1 to 99 seconds can be
tion.
lization command displays information about
20