D-Link DGS-3100 Series Cli Manual page 64

DGS-3100 Gigabit Ethernet Switch Manual
3 Error: error conditions
4 Warning: warning conditions
5 Notice: normal but significant condition
6 Informational: informational messages
7 Debug: debug-level messages
informational − Specifies that informational messages are to be sent
to the remote host. This corresponds to number 6 from the list
above.
warning − Specifies that warning messages are to be sent to the
remote host. This correspo
all − Sp ecifies that all of the currently supported syslog messages
that are generated by the Switch are to be sent to the remote host.
ity − Some of the operating system daemons and processes
facil
have been assigned Facility values. Processes and daemons that
have not been explicitly
use" facilities or they may use the "user-level" Facility. Those
Facilities that have been
Bold font indicates the facility va
supports.
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog
6 line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
12 NTP subsystem
13 log audit
14 log alert
15 clock daemon
16 local use 0 (local0)
17 local use 1 (local1)
18 local use 2 (local2)
19 local use 3 (local3)
20 local use 4 (local4)
21 local use 5 (local5)
22 local use 6 (local6)
23 local use 7 (local7)
local0 − Specifies that local use 0 messages are to be sent to the
56
nds to number 4 from the list above.
assigned a Facility may use any of the "local
designated are shown in the following:
lues that the Switch currently