Config Rate_Limit; Show Rate_Limit - D-Link DGS-3100 Series Cli Manual

DGS-3100 Gigabit Ethernet Switch Manual

config rate_limit

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure a rate limit of eg

show rate_limit

Purpose
S yntax
D escription
Parameters
QOS scheduling_mechanism
CLASS ID Mechanism
-------------- -------------------
Class-0 strict
Class-1 strict
Class-2 strict
Class-3 strict
Cla ss-4 strict
Class-5 strict
Cla ss-6 strict
Cla ss-7 strict
DGS3100#
To enable rate limitation of specific egress ports.
config rate_limit [<portlist> | all] [disable | <value 3500-
1000000>]
The
config rate_limit
egress ports.
<portlist> − A port or range of ports to be set.
all − Specifies that all ports are to be configured.
disable − Di
<value 3500-1000000> The rate limit value. The value may
between 3500 and 1000000.
None.
ress port 1:
DGS3100 # config rate
Success.
DGS3 100 #
To show the rate limit of specific egress ports.
show rate_limit [<portlist> | all]
The show rate_limit command displays the rate limit of an egress
port.
<portlist> − A port or range of ports whose rate limit is to be
displayed.
all − Specifies that all ports are to be displayed.
command enables setting of rate limitation of
sables rate limiting.
_limit 1:1
84
be