Ssh Commands; Enable Ssh - D-Link DGS-3100 Series Cli Manual

DGS-3100 Gigabit Ethernet Switch Manual
The SSH commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command

enable ssh

disable ssh
config ssh authmode
show ssh authmode
config ssh server
show ssh server
show ssh algorithm
config ssh crypto
show ssh crypto
delete ssh crypto
Each command is listed in detail, as follows:
enable ssh
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SSH:
DGS3100# enable ssh
TELNET will be disabled when enable SSH.
Success.
DGS3100#
Parameter
publickey [enable | disable]
{ timeout <sec 120-600> | port <tcp_port_number 1-65535> }
<username 1-48> [ rsa | dsa ]
<username 1-48>
To enable SSH.
enable ssh
The enable ssh command enables SSH on the Switch.
None
Only administrator-level users can issue this command.
130
24
SSH C
OMMANDS