Attaching The Document Support - GRAPHTEC CS600 User Manual

2. PREPARATION

2.3 Attaching the Document Support

Always ensure that the document support wires are attached to the scanner unit before
scanning a document.
Note: Drawings of the CS600-11/CS500-11 model are used for the explanations.
Normal documents
[Up to 1.5 mm thick]
The document may be damaged upon contact with the power cable if it is scanned
without the document support wires in place.
Thick documents (CS600 only)
[Thicker than 1.5 mm]
Scanning may not be performed correctly if the document is scanned without the thick
document support unit in place.
2 – 12
CS500-06/IS200-06
Document
support wires
Document
support plates
Thick document
support unit
CS600/CS500/IS200