GRAPHTEC CS600 User Manual page 28

2. PREPARATION
(3) Insert the center part of the document support wire into the elongated slot.
(4) Attach the other document support wires in the same manner.
Detach the document support wires when moving or packing the scanner. Squeeze
each wire gently towards the center and then lift it up to detach it.
Attaching the document support plates
(1) Take one of the two document support plates provided, and insert its hooks into the
slots at the rear of the scanner.
(2) Attach the second document support plate in the same manner.
Detach the document support plates when moving or packing the scanner. Lift the
plates up and out of the slots to detach them.
2 – 14
Hooks Document support plate
CS600/CS500/IS200