GRAPHTEC CS600 User Manual page 77

(5) Select Calibration on the Scanner menu.
(6) Select All in Calibration and click the [Execute] button.
(7) The following message is displayed. Insert the calibration sheet into the scanner as
instructed.
(8) Clicking the [OK] button begins calibration.
(9) Calibration ends after approximately 10 minutes.
Click the [OK] button to complete calibration.
(10) To check the calibration results, click the
in step (5) above).
CS600/CS500/IS200
Confirm button in the Calibration menu (shown
5. DAILY MAINTENANCE
5 – 9