Attaching The Document Support Wires - GRAPHTEC CS400 User Manual

2.3 Attaching the Document Support Wires

Always ensure that the document support wires are attached to the scanner unit before
scanning a document.
The document may be damaged upon contact with the power cable if it is scanned
without the document support wires in place.
Attaching the document support wires
(1) Insert one end of the document support wire provided into the slot at the rear of the
scanner.
(2) Squeeze the document support wire, and insert the other end.
CS400/300
2. PREPARATION
Document
support wires
2 – 7