GRAPHTEC CS600 User Manual page 24

2. PREPARATION
2 – 10
SCAN key
This key enables you to scan a document according to the settings of
Scanning Master 21+ when the scanner is connected to a computer.
Start up Scanning Master 21+ before scanning a document if it is not
3
already active*
*3 Only when the scanner is in READY mode
FORWARD key
READY mode : Advances the document into the scanner. If this key
ITA mode : Raises the top cover. If the document has been
REVERSE key
READY mode : Feeds the document towards you. If this key is
ITA mode : Lowers the top cover. If the document has been
STOP key
Compulsorily stops scanning of the document.
is pressed after a document has been loaded, the
document loaded status is cancelled and the document
is ejected towards the rear of the scanner.
inserted on top of the paper sensor at the front of
the scanner, the document thickness is automatically
detected.
pressed after a document has been loaded, the
document loaded status is cancelled and the document
is ejected towards the front of the scanner.
inserted on top of the two paper sensors at the front
and rear of the scanner, the document thickness is
automatically detected.
CS600/CS500/IS200