GRAPHTEC CS600 User Manual page 38

For automatic setup (when connected to the DHCP server)
Select "Get IP address automatically", and then click the [Next] button.
For manual setup
Select "Assign IP address", specify your desired IP address, and then click
[Next]
Please contact your network administrator if you do not know your IP address. Two
or more identical IP addresses may cause network problems.
(9) Confirm the settings, and then click the [Execute].
(10) This completes the Device Setup operation.
CS600/CS500/IS200
3. PREPARING TO OPERATE THE SCANNER
3 – 9