Menu: Viewing And Configuring Timep - HP PROCURVE 6120 Management And Configuration Manual

==========================- CONSOLE - MANAGER MODE -==========================
System Name : ProCurve
System Contact :
System Location :
Inactivity Timeout (min) [0] : 0
Inbound Telnet Enabled [Yes] : Yes
Time Sync Method [None] : TIMEP
TimeP Mode [Disabled] : Disabled
Tftp-enable [Yes] : Yes
Time Zone [0] : 0
Daylight Time Rule [None] : None
Actions-> Cancel
Figure 9-12. The System Information Screen (Default Values)

Menu: Viewing and Configuring TimeP

To View, Enable, and Modify the TimeP Protocol:
1. From the Main Menu, select:
2. Switch Configuration...
1. System Information
Switch Configuration - System Information
Edit Save
Press [E] (for Edit). The cursor moves to the System Name field.
Use [v] to move the cursor to the Time Sync Method field.
2.
If TIMEP is not already selected, use the Space bar to select
3.
press [v] once to display and move to the TimeP Mode field.
4. Do one of the following:
• Use the Space bar to select the DHCP mode, then press
the cursor to the Poll Interval field, and go to step 6.
Use the Space bar to select the Manual mode.
•
[>]
i. Press to move the cursor to the Server Address field.
TimeP: Viewing, Selecting, and Configuring
MAC Age Time (sec) [300] : 300
Web Agent Enabled [Yes] : Yes
Time Protocol Selection Parameter
– TIMEP (the default)
– SNTP
– None
Help
Time Protocols
, then
TIMEP
[v]
to move
9-17