Group Access Levels; Snmpv3 Communities - HP PROCURVE 6120 Management And Configuration Manual

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Group Name
managerpriv
managerauth
operatorauth
operatornoauth
commanagerrw
commanagerr
comoperatorrw
comoperatorr
N o t e
13-12

Group Access Levels

The switch supports eight predefined group access levels. There are four
levels for use with version 3 users and four are used for access by version 2c
or version 1 management applications.
Group Access Type
Ver3 Must have Authentication
and Privacy
Ver3 Must have Authentication
Ver3 Must have Authentication
Ver3 No Authentication
Ver2c or Ver1
Ver2c or Ver1
Ver2c or Ver1
Ver2c or Ver1
Each view allows you to view or modify a different set of MIBs.
■ Manager Read View – access to all managed objects
Manager Write View – access to all managed objects except the follow-
■
ing: vacmContextTable, vacmAccessTable, vacmViewTreeFamilyTable
■ OperatorReadView – no access to icfSecurityMIB, hpSwitchIpTftp-
Mode, vacmContextTable, vacmAccessTable, vacmViewTreeFami-
lyTable, usmUserTable, snmpCommunityTable
Discovery View – Access limited to samplingProbe MIB.
■
All access groups and views are predefined on the switch. There is no method
to modify or add groups or views to those that are pre-defined on the switch.

SNMPv3 Communities

SNMP commuities are supported by the switch to allow management
applications that use version 2c or version 1 to access the switch. The
communities are mapped to Group Access Levels that are used for version 2c
or version 1 support. For more information refer to "Group Access Levels" on
page 13-12. This mapping will happen automatically based on the communities
access privileges, but special mappings can be added with the snmpv3
community command.
Group Read View
ManagerReadView
ManagerReadView
OperatorReadView
OperatorReadView
ManagerReadView
ManagerReadView
OperatorReadView
OperatorReadView
Group Write View
ManagerWriteView
ManagerWriteView
DiscoveryView
DiscoveryView
ManagerWriteView
DiscoveryView
OperatorReadView
DiscoveryView