Configuring A Broadcast Limit On The Switch - HP PROCURVE 6120 Management And Configuration Manual

Port Status and Configuration
Viewing Port Status and Configuring Port Parameters
Figure 10-11. Example Continued from Figure 10-10
Figure 10-12. Example Continued from Figure 10-11
10-18

Configuring a Broadcast Limit on the Switch

Broadcast-Limit on switches covered in this guide is configured on a per-port
basis. You must be at the port context level for this command to work, for
example:
Disables per-port flow
control on ports A5 and A6.
Disables per-port flow
control on ports A1 through
A4. Flow control is now
disabled on the switch.
Ports formerly configured for
flow control.