HP PROCURVE 6120 Management And Configuration Manual page 222

N o t e
===========================- TELNET - MANAGER MODE -=============
Port
----
A1
A2
A3
A4
A5
A6
A7
A8
Actions->
Cancel changes and return to previous screen.
Use arrow keys to change action selection and <Enter> to execute ac-
tion.
Figure 10-2. Example of Port/Trunk Settings with a Trunk Group Configured
Using the Menu To Configure Ports.
You can configure and view the port settings by using the menu.
The menu interface uses the same screen for configuring both individual ports
and port trunk groups. For information on port trunk groups, refer to Chapter
11, "Port Trunking" .
1. From the Main Menu, Select:
2. Switch Configuration...
2. Port/Trunk Settings
An example of the Menu display is shown below.
Switch Configuration - Port/Trunk Settings
Type Enabled
--------- + -------
1000T | Yes
1000T | Yes
1000T | Yes
1000T | Yes
1000T | Yes
1000T | Yes
1000T | Yes
1000T | Yes
Cancel
2. Press [E] (for Edit). The cursor moves to the Enabled field for the first port.
3. Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
[Enter], then press [S] (for Save).
Viewing Port Status and Configuring Port Parameters
Mode
------------
Auto-10-100
Auto-10-100
Auto
Auto
Auto
Auto
Auto
Auto
Edit Save
Port Status and Configuration
Flow Ctrl Group
--------- -----
Disable
Disable
Disable
Disable
Disable
Disable
Disable Trk1
Disable Trk2
Help
Type
-----
Trunk
Trunk
10-7