Task Monitor-Collecting Processor Data; Switch Management Address Information; Menu Access - HP PROCURVE 6120 Management And Configuration Manual

Monitoring and Analyzing Switch Operation
Status and Counters Data
B-8
Task Monitor—Collecting Processor Data
The task monitor feature allows you to enable or disable the collection of
processor utilization data. The task-monitor cpu command is equivalent to the
existing debug mode command "taskusage -d". (The taskUsageShow command
is available as well.)
When the task-monitor command is enabled, the show cpu command summa-
rizes the processor usage by protocol and system functions.
Syntax: [no] task-monitor cpu
Allows the collection of processor utilization data. Only
manager logins can execute this command. The settings are
not persistent, that is, there are no changes to the configura-
tion.
Default: Disabled
ProCurve(config)# task-monitor cpu
ProCurve(config)# show cpu
2 percent busy, from 2865 sec ago
1 sec ave: 9 percent busy
5 sec ave: 9 percent busy
1 min ave: 1 percent busy
% CPU | Description
-------+--------------------------
99 | Idle
Figure B-4. Example of the task-monitor cpu Command and show cpu Output

Switch Management Address Information

Menu Access

From the Main Menu, select:
1 Status and Counters ...
2. Switch Management Address Information