Lldp And Cdp Data Management; Lldp And Cdp Neighbor Data - HP PROCURVE 6120 Management And Configuration Manual

Procurve series 6120 switches
Table of Contents

Advertisement

ProCurve# walkmib ifDescr
ifDescr.1 = D1
ifDescr.2 = D2
ifDescr.3 = D3
.
.
.
ifDescr.23 = X1
ifDescr.24 = X2
ifDescr.25 = C1
ifDescr.75 = DEFAULT_VLAN
.
.
.
Figure 13-24. Matching Internal Port Numbers to External Slot/Port Numbers

LLDP and CDP Data Management

This section describes points to note regarding LLDP (Link-Layer Discovery
Protocol) and CDP (Cisco Discovery Protocol) data received by the switch
from other devices. LLDP operation includes both transmitting LLDP packets
to neighbor devices and reading LLDP packets received from neighbor
devices. CDP operation is limited to reading incoming CDP packets from
neighbor devices. (ProCurve switches do not generate CDP packets.)

LLDP and CDP Neighbor Data

With both LLDP and (read-only) CDP enabled on a switch port, the port can
read both LLDP and CDP advertisements, and stores the data from both types
of advertisements in its neighbor database. (The switch only stores CDP data
that has a corresponding field in the LLDP neighbor database.) The neighbor
database itself can be read by either LLDP or CDP methods or by using the
show lldp commands. Take note of the following rules and conditions:
If the switch receives both LLDP and CDP advertisements on the same
port from the same neighbor the switch stores this information as two
separate entries if the advertisements have differences chassis ID and port
ID information.
If the chassis and port ID information are the same, the switch stores this
information as a single entry. That is, LLDP data overwrites the corre-
sponding CDP data in the neighbor database if the chassis and port ID
information in the LLDP and CDP advertisements received from the same
device is the same.
Data read from a CDP packet does not support some LLDP fields, such as
"System Descr", "SystemCapSupported", and "ChassisType". For such
fields, LLDP assigns relevant default values. Also:
Configuring for Network Management Applications
LLDP (Link-Layer Discovery Protocol)
13-77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 6120g/xgProcurve 6120xg

Table of Contents