Network Out-of-Band Management (OOBM)
Tasks
G-10
OOBM IPv4 address configuration
Configuring an IPv4 address for the OOBM interface is similar to VLAN IP
address configuration, but it is accomplished within the OOBM context.
Syntax:
From the OOBM context:
[no] ip address [dhcp-bootp | ip-address/mask-length]
From the general configuration context:
[no] oobm ip address [dhcp-bootp | ip-address/mask-length]
Configures an IPv4 address for the switch's OOBM interface.
You can configure an IPv4 address even when global OOBM
is disabled; that address will become effective when OOBM is
enabled.
For example:
ProCurve (oobm)# ip address 10.1.1.17/24
OOBM IPv4 default gateway configuration
Configuring an IPv4 default gateway for the OOBM interface is similar to VLAN
default gateway configuration, but it is accomplished within the OOBM con-
text.
Syntax:
From the OOBM context:
[no] ip default-gateway ip-address
From the general configuration context:
[no] oobm ip default-gateway ip-address
Configures an IPv4 default gateway for the switch's OOBM
interface.
For example:
ProCurve (oobm)# ip default-gateway 10.1.1.1