HP PROCURVE 6120 Management And Configuration Manual page 538

Troubleshooting
DNS Resolver
ProCurve(config)# ip dns server-address 10.28.229.10
ProCurve(config)# ip dns domain-name pubs.outdoors.com
Figure C-28. Configuring Switch "A" in FigureC-27 To Support DNS Resolution
ProCurve# ping docservr
10.28.229.219 is alive, time = 1 ms
ProCurve# traceroute docservr
traceroute to 10.28.229.219
1 hop min, 30 hops max, 5 sec. timeout, 3 probes
1 10.28.192.2
2 10.28.229.219
Figure C-29. Example of Ping and Traceroute Execution for the Network in Figure C-27 on Page C-83
C-84
Configuring switch "A" with the domain name and the IP address of a DNS
server for the domain enables the switch to use host names assigned to IP
addresses in the domain to perform ping and traceroute actions on the devices
in the domain. To summarize:
Entity:
DNS Server IP Address
Domain Name (and Domain Suffix for Hosts in
the Domain)
10.28.229.219 by the
Host Name Assigned to
DNS Server
Fully Qualified Domain Name for the IP address
Used By the Document Server (
Switch IP Address
Document Server IP Address
With the above already configured, the following commands enable a DNS-
compatible command with the host name docserver to reach the document
server at 10.28.229.219.
1 ms
0 ms
Traceroute Target
Identity:
10.28.229.10
pubs.outdoors.com
docservr
docservr.pubs.outdoors.com
10.28.229.219)
10.28.192.1
10.28.229.219
First-Hop Router ("B")
0 ms 0 ms
0 ms 0 ms