Command Prompts
In the default configuration, your switch displays a CLI prompt similar to the
following examples:
ProCurve 6120G/XG Blade Switch#
ProCurve 6120XG Blade Switch#
To simplify recognition, this guide uses ProCurve to represent command
prompts. For example:
ProCurve#
(You can use the hostname command to change the text in the CLI prompt.)
Screen Simulations
Displayed Text. Figures containing simulated screen text and command
output look like this:
ProCurve> show version
Image stamp:
/sw/code/build/vern
Feb 20 2009 14:56:49
Z.14.XX
427
Boot Image:
Primary
Build Options:
QA
Watchdog:
ENABLED
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden-
tification. For example:
ProCurve(config)# clear public-key
ProCurve(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile
Configuration and Operation Examples
Keys
Simulations of actual keys use a bold, sans-serif typeface with square brackets.
For example, the Tab key appears as
[Tab]
and the "Y" key appears as
Getting Started
Conventions
[Y]
.
1-3