HP PROCURVE 6120 Management And Configuration Manual page 325

ProCurve(config)# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
blue-team
red-team
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Trap Category
------------------------------
SNMP Authentication
Password change
Login failures
Port-Security
Authorization Server Contact
ARP Protection
DHCP Snooping
Address
---------------
10.28.227.200
10.28.227.105
10.28.227.120
...
Figure 13-12. Display of SNMP Notification Configuration
In the following example, the show snmp-server command output shows that
the switch has been configured to send SNMP traps and notifications to
management stations that belong to the "public", "red-team", and "blue-team"
communities.
MIB View Write Access
Operator Restricted
Manager Unrestricted
Manager Unrestricted
Community
----------
public
red-team
blue-team
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Current Trap Configuration
--------------------------
extended
enabled
enabled
enabled
enabled
enabled
enabled
Events Sent Notify Type
----------- -----------
All trap
Critical trap
Not-INFO trap
SNMP Community
configuration
Link-change
trap setting
Network security
notification
Retry Timeout
----- -------
3 15
3 15
3 15
13-33