Oobm Show Commands; Show Oobm - HP PROCURVE 6120 Management And Configuration Manual

OOBM Show Commands

The commands for OOBM are similar to the analogous commands for
show
the data plane. Note that you must always include the
the information for the OOBM interface, regardless of the context. For
instance, even from the OOBM context the
configuration for the data plane; to see the IP configuration of the OOBM
interface you need to use

Show OOBM

This command shows the global OOBM and OOBM port configurations.
Syntax: show oobm
Summarizes OOBM configuration information. This com-
mand displays the global OOBM configuration (enabled or
disabled), the OOBM interface status (up or down) and the
port status (enabled/disabled, duplex, and speed).
You can issue this command from any context.
For example:
ProCurve# show oobm
Global Configuration
OOBM Enabled
OOBM Port Type
OOBM Interface Status
OOBM Port
OOBM Port Speed
Network Out-of-Band Management (OOBM)
show ip
show oobm ip .
: Yes
: 10/100TX
: Up
: Enabled
: Auto
Tasks
parameter to see
oobm
command displays the IP
G-11