Displaying Cli "Help; Listing Command Options; Displaying Command-List Help - HP ProCurve series 2500 Management And Configuration Manual

Thus, if you wanted to create a port trunk group using ports 5 - 8, the above
conventions show that you could do so using any of the following forms of
the trunk command:
Listing Command Options. You can use the CLI to remind you of the
options available for a command by entering command keywords followed by
?
. For example, suppose you wanted to see the command options for config-
uring port 5:
Figure 3-6. Example of How To List the Options for a Specific Command

Displaying CLI "Help"

CLI Help provides two types of context-sensitive information:
Command list with a brief summary of each command's purpose
I
I Detailed information on how to use individual commands
Displaying Command-List Help. You can display a listing of command
Help summaries for all commands available at the current privilege level. That
is, when you are at the Operator level, you can display the Help summaries
only for Operator-Level commands. At the Manager level, you can display the
Help summaries for both the Operator and Manager levels, and so on.
help
Syntax:
For example, to list the Operator-Level commands with their purposes:
Using the Command Line Interface (CLI)
Using the CLI
This example displays the command options
for configuring port 5 on the switch.
3-11