Gvrp - HP ProCurve series 2500 Management And Configuration Manual

GVRP

Feature
view GVRP configuration
list static and dynamic VLANs
on a GVRP-enabled switch
enable or disable GVRP on the
switch
enable or disable GVRP on
individual ports
control how individual ports
will handle advertisements for
new VLANs
convert a dynamic VLAN to a
static VLAN
configure static VLANs
GVRP—GARP VLAN Registration Protocol—is an application of the Generic
Attribute Registration Protocol—GARP. GVRP is defined in the IEEE 802.1Q
standard, and GARP is defined in the IEEE 802.1P standard.
N o t e
To understand and use GVRP you must have a working knowledge of 802.1Q
VLAN tagging. (See "Port-Based Virtual LANs (Static VLANs)" on page 9-50.)
GVRP uses "GVRP Bridge Protocol Data Units" ("GVRP BPDUs") to "adver-
tise" static VLANs. In this manual, a GVRP BPDU is termed an advertisement.
GVRP enables the Switch 2512/2524 to dynamically create 802.1Q-compliant
VLANs on links with other devices running GVRP. This enables the switch to
automatically create VLAN links between GVRP-aware devices. (A GVRP link
can include intermediate devices that are not GVRP-aware.) This operation
reduces the chances for errors in VLAN configuration by automatically pro-
viding VLAN ID (VID) consistency across the network. That is, you can use
GVRP to propagate VLANs to other GVRP-aware devices instead of manually
having to set up VLANs across your network. After the switch creates a
dynamic VLAN, you can optionally use the CLI static <vlan-id> command
convert it to a static VLAN or allow it to continue as a dynamic VLAN for as
long as needed. You can also use GVRP to dynamically enable port member-
ship in static VLANs configured on a switch.
Configuring Advanced Features
Default Menu
n/a page 9-84
n/a —
disabled page 9-84
enabled page 9-84
Learn page 9-84
n/a —
DEFAULT_VLAN page 9-57
(VID = 1)

GVRP

CLI Web
page 9-86 page 9-89
page 9-88 page 9-89
page 9-87 page 9-89
page 9-87 —
page 9-87 page 9-89
page 9-89 —
page 9-62 page 9-89
9-77