Port-Based Virtual Lans (Static Vlans) - HP ProCurve series 2500 Management And Configuration Manual

Procurve 2500 series
Hide thumbs Also See for HP ProCurve series 2500:
Table of Contents

Advertisement

Configuring Advanced Features

Port-Based Virtual LANs (Static VLANs)

Port-Based Virtual LANs (Static VLANs)

VLAN Features
Feature
view existing VLANs n/a
configuring static
VLANs
configuring dynamic
VLANs
A VLAN is a group of ports designated by the switch as belonging to the same
broadcast domain. (That is, all ports carrying traffic for a particular subnet
address would normally belong to the same VLAN.)
N o t e
This section describes static VLANs, which are VLANs you manually config-
ure with a name, VLAN ID (VID), and port assignments. (For information on
dynamic VLANs, see "GVRP" on page 9-77.)
Using a VLAN, you can group users by logical function instead of physical
location. This helps to control bandwidth usage by allowing you to group high-
bandwidth users on low-traffic segments and to organize users from different
LAN segments according to their need for common resources.
By default, the Series 2500 switches are 802.1Q VLAN enabled and allow up
to 30 port-based VLANs (default: 8). For information on GVRP, see "GVRP" on
page 9-77. (The 802.1Q compatibility enables you to assign each switch port
to multiple VLANs, if needed, and the port-based nature of the configuration
allows interoperation with older switches that require a separate port for each
VLAN.)
General Use and Operation. Port-based VLANs are typically used to
enable broadcast traffic reduction and to increase security. A group of net-
work users assigned to a VLAN form a broadcast domain that is separate from
other VLANs that may be configured on a switch. Packets are forwarded only
between ports that are designated for the same VLAN. Thus, all ports carrying
traffic for a particular subnet address should be configured to the same VLAN.
Cross-domain broadcast traffic in the switch is eliminated and bandwidth is
9-50
Default
Menu
page 9-57
thru 9-62
default VLAN with
page 9-57
VID = 1
thru 9-62
disabled
See "GVRP" on page 9-77.
CLI
Web
page 9-63 page 9-68
page 9-62 page 9-68

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 2512Procurve 2524

Table of Contents